A majority of red light and speed cameras use a very strong flash to photograph the license plate of vehicles, our spray contains microscopic metallic particles. When the spray is properly applied, the micro-particles redirect the flash back to the camera. Thereby overexposing your license plate, rendering the image unreadable.
Proper application is 7-10 coats, this will spread the micro-particles evenly over the plate to give sufficient coverage, allowing the entire plate to produce proper flash back.
PhotoBlocker®
√ Reflects flash based Traffic Cameras, helping you avoid those overpriced Red Light Camera Tickets.
√ Easy to use Spray on Formula.
√ One time application, lasts forever.
√ Will not wash off.
√ Undetectable to the naked eye.
√ Get a can before you get a ticket.
Step 1: Remove your license plate from your car. Thoroughly clean the surface using soap and water and allow to dry.
Step 2: Before application, make sure that you lay something out to protect the surrounding area. Apply product in even strokes, allowing a couple of minutes of dry time between each coat. Repeat 7-10 coats until your plate has a nice shiny, gloss finish.
Step 3: Allow your plate to dry completely before placing it back on your vehicle.
Step 4: Congratulations! Your car is now has an excellent chance of avoiding the “Money Making Camera Traps”
* Caution: Always obey Local, State and Federal Traffic Laws. We do not recommend using this product to defeat Toll Booth Cameras. As recommended, this product is not a guarantee, nor do we guarantee against receiving a traffic ticket as not all Red Light Cameras utilize Flash based technology.
* The use of a personal digital camera for testing is unjustifiable for the testing products performance. A personal digital camera in use will take a few seconds to measure the light, adjust exposure, shutter speed, focus and flash level before taking a picture. Under those circumstances, the pictures tend to be legible as the camera was given enough time to calculate the best setting for a perfect picture.
Proper application is 7-10 coats, this will spread the micro-particles evenly over the plate to give sufficient coverage, allowing the entire plate to produce proper flash back.
PhotoBlocker®
√ Reflects flash based Traffic Cameras, helping you avoid those overpriced Red Light Camera Tickets.
√ Easy to use Spray on Formula.
√ One time application, lasts forever.
√ Will not wash off.
√ Undetectable to the naked eye.
√ Get a can before you get a ticket.
Easy Application
* Caution: Always obey Local, State and Federal Traffic Laws. We do not recommend using this product to defeat Toll Booth Cameras. As recommended, this product is not a guarantee, nor do we guarantee against receiving a traffic ticket as not all Red Light Cameras utilize Flash based technology.
* The use of a personal digital camera for testing is unjustifiable for the testing products performance. A personal digital camera in use will take a few seconds to measure the light, adjust exposure, shutter speed, focus and flash level before taking a picture. Under those circumstances, the pictures tend to be legible as the camera was given enough time to calculate the best setting for a perfect picture.
On the contrary, a traffic camera works in a totally different way and does not have the luxury of a few seconds to establish the correct exposure, focus, shutter speed and flash level before taking a picture. Traffic cameras are programmed to take pictures on set parameters such as distance and ambient light. Cars zooming past are photographed in a split second.
Because of the nature of this product, PlanetMace does not offer any warranty or except returns of this item. This product is designed to work on “Flash Based” Traffic Monitoring Systems. Customer is responsible for proper application. Product may not be effective on all Traffic Monitoring Systems.
